Kenwood KA-7300 Integrated Amplifier

Ft. panel- Toggle switches for Power(on/off w/red indicator), Attenuator(-20db or -0db), Tape Monitor(Deck A, Source, or Deck B), Tape Dubbing(Deck A to B, Source, or Deck B to A), and 3 tone control switches labeled "Turnover"(400Hz, off, or 150Hz), (3KHz, off, or 6KHz), and "Presence"(3KHz, off, or 800Hz). Push button controls for 18Hz Filter(on/off), 40Hz Filter(on/off), and 8KHz Filter(on/off). Rotary controls for Speakers(off, A, B, A and B, and C), Bass, Treble, Balance, Volume, Loudness(off, 1, 2, or 3), Mode(Reverse, Stereo, or Mono), and Input Selector(Aux, Tuner, Phono 1, and Phono 2). 1/4" Headphone jack. Rear panel- Jacks for Phono 1, Phono 2, Aux, Tuner, Play and Record for Tape A, Play and Record for Tape B,(also has DIN plug for Tape B), and Pre-out and Main In(externally switched-no jumpers required). Jacks for Speakers A, Speakers B, and Speakers C. 2 switched and 1 un-switched AC outlets, 1 chassis ground lug, and slide switches for AC Power 120V, and "Normal" or "Separate" Amp. Brushed aluminum metal faceplate with dark gray metal enclosure. Fully functional. Supports 2 turntables, 2 tape decks, 1 tuner, 1 aux, 3 sets of speakers, and can be used as is, or in con-junction with an auxillary power amp. 60 watts per channel. 30 lbs.

(Awaiting service)

This page has been visited

times.