 |
PARTS FOR SALE
1976 Chevrolet Body For Sale. Body in very good condition. Just removed from the 6500 Pro-Street Bad Company Truck. Freshly Painted 2 years ago with Dupont Base and Clear Coats. Bad Company Name is just a sticker and should be easily removed. Brand new tail lights. Bed Cover also. $1200 or best offer. Have new body needs to go.
Call Jimmy @ 304-229-1349 after 5:30 through the week and any time on the weekends.
-----------------------------------------------------------------------
Dana 44 front axle complete with 5.88 ratio - $300
Dana 60 back axle complete with 5.88 ratio - $300
Call me at 804-445-3954 or email me at chevypullint@hotmail.com -----------------------------------------------------------------------
632 Rodeck engine and 641 Janke engine
Contact Brent Adkins (704) 902-0998 or turbine@statesville.net
-----------------------------------------------------------------------
(4) 315/75R16 (35-12.50/16 equivalant) mounted on aluminum 16x10 eagle 589 wheels $1300 obo,
(4) 35-13.50/ 15 baja claws mounted on 15x14 steel wheels (black). Tires are screwed to wheel to eliminate tire from spinning on the bead. $1250 obo. The first set has never been installed on a vehicle, while the second set has three passes on pro-street class pull truck
Chevy dually Front dana 60/ rear dana 70. Gear ratio unknown/ but will add to list once i get a chance to pull covers. Both axles are complete. Will take $500 for the 70 rear/ $1400 for dana 60 front, or sell the pair for $1800.
Shipping is responsibility of purchaser.
540--547-2508/ 540-718-3692bbrowntown@aol.com
---------------------------------------------------------------------
648" MOTOR,EPD BRODIX HEADS,STEEL CAP CHEVY BOWTIE BLOCK,4.85 CROWER CRANK AND RODS,KINSLER INJECTION,BUILT BY LEE EDWARDS,$30,000
648" MOTOR,BRODIX PONTIAC HEADS,CHEVY BOWTIE BLOCK,4.85 CROWER CRANK AND RODS,KINSLER INJECTION,BUILT BY LEE EDWARDS,$20,000
FDS75 ROCKWELL FRONT END 6.80 RATIO W/STEERING,BRAKES & LOCKOUT HUB---------H170 NARROWED REAR END 6.83 RATIO W/SCS AXLES AND DRIVE PLATES $4000 FOR BOTH FRONT AND REAR
8 1/8 LAKEWOOD BELLHOUSING, SCS REVERSER, SCS TRANSFER CASE W/SHAFT $3500
H172 ROCKWELL REAR END 6.14 RATIO 6 LUG HUBS $600
H172 ROCKWELL 6.20 RATIO CENTER SECTION $400
(2) MRT SINGLE BEADLOCK 18" WHEELS 6 LUG PATTERN $400
DANA 70 NEW SHORT &LONG INNER AXLES $200
BOB SMITH 540-662-4774 HOME 540-533-5665 CELL
-----------------------------------------------------------------------
Chevy 4x4 frame with Dana 70 front, Rockwell rear $750.00
Contact Phone Number: 252-426-7184
----------------------------------------------------------------------
PRO-FAB TRANSFER CASE (BILLET) QUICK CHANGE STYLE. LIKE NEW $1500.00 OBO. ASK FOR BRIAN OR DEWEY COOKE.
Contact Phone Number: 1-434-246-2252
----------------------------------------------------------------------
650 cu.in. Ford Profiler TFS fuel system. C and C Motorsports Aluminum block 10.3 deck. Stefs Dry Sump Oil Pan, Unassembled - $16,900 will separate
Call: Brian Cooke 434-246-2252 or 1-866-213-2252
----------------------------------------------------------------------
BBC Zoomies, new, not coated, for Big Chief flange angle - $375.00
BBC 572 Rotating assembly, like new - $1,100.00
434-242-2439
----------------------------------------------------------------------
Set of four 34/18/15 Dick Cepek Giant Pullers $500.00
1-252-331-3012
----------------------------------------------------------------------
1960-1987 Chevrolet and GMC truck parts.
1960-63 Steel Door Panels $40.00 for pair
1967-71 Drivers Side Door $100.00
1960-66 LWB 8 foot Fleetside bed $250.00
2WD Turbo 400 Transmission Thick Yoke. $150.00
4WD Turbo 400 Transmission N/R $150.00
NP203 T-Case $150.00
73-80 LWB 4x4 Frame $100.00
81-87 GMC or Chevy Front Clip off puller $150
81-87 Left Bed side $75.00
75-77 Chevy truck grill $25.00
73-80 Left Front Fender $40.00
73-80 Core Supports
And other Various parts call with needs 434-392-8041
----------------------------------------------------------------------
572 BBC, Merlin II Block, Block O-ring, 13.5:1 compression, Lunati 4.5 Crankshaft, Eagle Rods, JE Pistons, C&H Gapless Rings, Lunati Roller Cam, Herbert Roller Lifters, Merlin 345 Steel Heads, Severe Duty Valves, (springs replaced 7-03, valves replaced (8-04), Harland Sharp Rockers, Victor Intake, 1150 Dominator Carb, Milodon Oil Pan - $8800(540)-778-1663 or e-mail: dhscape@shentel.net
-----------------------------------------------------------------
I have 4 Midwest aluminum wheels for sale. 15" x 18", 6 hole Rockwell or military bolt pattern. Used one season, excellent condition. Will sell in pairs or all 4 at once. $600.00
715-234-5804 and Ask for Steve
-----------------------------------------------------------------
2 15"x 18" 6 LUG ROCKWELL WHEELS $ 300 For Pair! 434-547-8987
-----------------------------------------------------------------
BBC Cylinder Heads, Profiler 24 deg, 350 intake runner, 2.300 in./1.880 ex., 109 cc combustion chamber, These heads custom ported by Steve Schmidt Racing. Making great power on a 500+ci engine. Custom Steve Schmidt Edelbrock 4500 Victor intake manifold machined to match oval ports, yours with purchase. Priced to sell!! - $3250.00
Holley Carburetor 4150 HP, 950 CFM Proform main body, Great condition.
Call 804-690-5859
-----------------------------------------------------------------
Turbo 400 transmission & 208 T-case - $450
Lots of 1/2 - 1 ton Chevy and GMC Parts
Call 1-804-598-9352
-----------------------------------------------------------------
4WD Puller weight box, including weights, battery boxes and switch, tool tray, polished S.S. lid and front plate, tow ring, NTPA legal safety roller, $925
Rockwell and Dana 60 gearsets, $150. ; H-170/172 and F-106 centers, $350. ; H-170/172 housing, $75.
Prostock Pontiac Style Polished sheet metal valve covers, $100.
Autometer 5" face Pro-comp II tach, $100.
Fuel injection system, pump, barrel valve, nozzels, hoses, bi-passes, to install on your manifold, $ 675.
Call (717)-892-3701
Send E-Mail to: 4x4nut@kinex.net
Copyright © 2006 VIRGINIA TRUCK PULLERS ASSOCIATION. All Rights Reserved