 |
8000 LB. STOCK DIESEL 4X4 TRUCK
8000 LB. STOCK DIESEL 4X4 TRUCK
1. ALL TRUCKS COMPETING IN THIS CLASS MUST:
A. BE STOCK IN APPEARANCE – FLOOR IN BED MUST BE SOLID
B. BE POWERED BY A DIESEL ENGINE – DIESEL FUEL ONLY
C. HAVE STATE REGISTRATION IDENTIFICATION FOR HIGHWAY USE
D. BE LICENSED FOR HIGHWAY USE IN THAT STATE
E. HAVE A LICENSE PLATE ATTACHED TO THE VEHICLE
F. THE REGISTRATION IDENTIFICATION AND LICENSE PLATE MUST MATCH
G. HAVE A WHEELBASE AS MANUFACTURERED – NO ALTERATIONS TO WHEELBASE
2. NO DUAL WHEELS, STUDDED TIRES, TIRE CHAINS, OR ANY TIRES NOT SPECIFICALLY INTENDED FOR
STREET USE ARE PERMITTED. TIRES MUST CARRY A DOT NUMBER ON THE SIDEWALL. NO CUT OR
GROOVING ALLOWED. MAXIMUM TIRE SIZE IS 12.5 X 33. TIRE SIZE MUST BE MOLDED ON THE TIRE.
3. WEIGHTS ARE PERMITTED ONLY IN THE BED OF THE VEHICLE. WEIGHTS MUST BE SECURED TO
PREVENT SLIDING AROUND IN THE BED.
4. DIESEL ENGINE MUST HAVE BEEN ORGINALLY INTENDED FOR A PICKUP TRUCK USE. SINGLE
TURBOCHARGER ONLY PERMITTED.
5. THE VEHICLE AND VEHICLE DRIVELINE BEING USED (INCLUDING THE FRONT AND REAR AXLES,
CLUTCH, TRANSMISSION, AND DRIVESHAFT) MUST HAVE BEEN ORIGINALLY PRODUCED FOR DIESEL
ENGINE TRUCK USE.
6. A WORKING SUSPENSION, FRONT AND REAR, IS REQUIRED. NO BLOCKED (SOLID) SUSPENSIONS.
VEHICLE MUST HAVE A MINIMUM OF THREE PLYS OF REAR SPRINGS.
7. FACTORY EXHAUST SYSTEM MUST BE INSTALLED AND FUNCTIONAL. ENGINE AND RADIATOR MUST BE
IN THE ORIGINAL LOCATION, AS PRODUCED BY THE MANUFACTURER. ALL ENGINE FANS MUST BE
SHROUDED.
8. THE HITCH POINT TO BE A MAXIMUM OF 20 INCHES FROM THE GROUND. THE HITCH POINT MUST BE
STATIONARY IN ALL DIRECTIONS. A CLEVIS OR REESE TYPE HITCH WITH A THREE INCH HOLE IS
REQUIRED - NO PULLING FROM THE BUMPER. THE HOOK POINT MUST BE FURTHEST POINT TO THE BACK OF THE TRUCK.
9. SNOW PLOW MOUNTING BRACKET(S) ARE ALLOWED – NO PLOW BLADES.
10. ALL BODY PARTS MUST REMAIN INSIDE THE CAB OF THE TRUCK WHEN COMPETING.
Send E-Mail to: 4x4nut@kinex.net
Copyright © 2003 . All Rights Reserved